Watch · Video guides

See how it works.

Selected video explanations, paired with the written guides and version notes that help you put them to use.

Watch alongside: Phone firmware deployment and rollback planning

Browse all 78 selections
Experience level, length and sorting
Clear filters

5 videos · Showing 1–5

Setup & configuration · Intermediate

Fanvil X4U: first setup, admin access and firmware orientation

VoIP SupplyVersion-specific

This unboxing continues into the phone’s administration interface. It is useful for learning where to change the administrator password, locate the correct documentation and inspect firmware or reset controls before making changes. Pair it with the firmware guide to turn an interface tour into a planned maintenance task with a recoverable configuration.

Setup & configuration · Intermediate

Grandstream DP750 and DP720: pairing, accounts and handset lines

N2V SolutionsLegacy

A complete setup follows three separate relationships: the handset subscribes to the DECT base, the base registers SIP accounts, and each handset receives an outgoing line assignment. The final call tests show why checking only one green status indicator is insufficient. This is a particularly useful companion to the cordless-phone guide for anyone encountering a paired handset that still cannot place calls.

Setup & configuration · Intermediate

Grandstream GXP firmware: follow a UCM Zero Config update

Legacy

See how a provisioning policy points a GXP2170 at a firmware source, and why global policy, global templates and model templates have different reach. The demonstration also catches a stale browser version label and checks the installed version in system information. It is useful preparation for a staged update, provided you replace the historical firmware choices with your approved maintenance plan.

Setup & configuration · Foundational

Jabra Evolve2 85: manage the headset, USB adapter and Teams audio

Version-specific

This longer walkthrough separates management of the Link 380 USB adapter from management of the Evolve2 85 headset. It then connects firmware checks, boom-arm settings, on-ear detection and mute feedback to Teams device selection. The practical lesson is to verify the chosen microphone and call controls after changing settings instead of assuming that Bluetooth pairing completed the setup.

Setup & configuration · Foundational

Yealink WH62/WH63 on an Avaya J189: the EHS60 connection

Metroline DirectVersion-specific

Follow a specific desk-phone and headset combination through its cabling and remote answer controls. The value is seeing that a headset can have an audio path while still needing the correct hook-switch interface and phone setting to answer away from the desk. Compare the demonstration with Yealink’s model matrix before applying it to another Avaya handset.

How to use these selections

Read the applicability note before following a configuration walkthrough. Older interfaces can still teach useful concepts; the written guides provide our current software baseline. Videos remain on the creator’s channel, and you can open them directly on YouTube.

Selection notes are based on the complete available transcript and checks against primary documentation. Audio and screen readability have not yet been independently verified. Chapter timestamps are included only when verified.

Selections are editorial. A creator may promote their own services or affiliate links; that does not establish a relationship with VoIP.info.

Claims worth examining

Some popular explanations need a closer look. These reviews distinguish useful ideas from claims that the protocol does not support.

SIP and VOIP. The Privacy Solution No One Knows About